Chapter 4: Supplementary applications
EST3X Technical Reference Manual 97
The communication bridge mounts on a separately ordered bracket
(FSB-BRKT2) that can be installed on the side of an SFS1-ELEC chassis in an
EST3X cabinet or in an MFC-A external enclosure. You can configure your
system for communication between a same BMS and a single EST control panel
or multiple control panels in your network. See FSB-PC2 and FSB-PCLW
Communication Bridge Installation Sheet (P/N 3102007) for application details,
as well as installation instructions and specifications.
FireWorks communication
FireWorks lets you use one or more display computers to monitor and control
several networks of multiplex signaling systems. You can configure your EST3X
and combination EST3-EST3X systems to communicate with a FireWorks
UL5W7 workstation over the RS-232 connection on the SFS1-CPU. Refer to the
FireWorks UL5W7 Workstation Installation Manual (P/N 3101492-EN) for
installation instructions and specifications.
To Next Page
Loading...
