Chapter 1: Introduction
2 EST3X Technical Reference Manual
About this manual
This manual provides information on how to install, program, and operate an
EST3X life safety control panel. It is organized as follows:
Chapter 1, Introduction: Provides information about this manual and other
related documentation.
Chapter 2, Product description: Provides technical descriptions of the control
panel and its operation. It also provides descriptions of the command menus.
Chapter 3, Operating instructions: Provides instructions for operating the fire
alarm system from the control panel user interface. It is intended for those who
might be expected to operate the control panel in a fire alarm emergency.
Chapter 4, Supplementary applications: Provides technical descriptions of
supplementary applications that can expand system capabilities.
Chapter 5, Installation: Provides installation information for system components
and applications. It is intended for those trained and authorized to maintain the
fire alarm system.
Chapter 6, Preventive maintenance and testing: Provides maintenance
schedules and testing procedures for fire alarm system. It is intended for those
trained and authorized to maintain the fire alarm system.
Chapter 7, Service and troubleshooting: Provides instructions for servicing
and troubleshooting the fire alarm system. It is intended for those trained and
authorized to maintain the fire alarm system.
Appendix A, System calculations: Provides worksheets for sizing standby
batteries, and for calculating the maximum wire lengths for notification appliance
circuits and intelligent addressable loops.
Appendix B, Addresses: Provides a comprehensive list of addresses to use as
a general reference.
Appendix C, Programming options: Summarizes the operation of the system.
Intended audience
The intent of this document is to provide trained and authorized personnel with
technical, operational, service, and maintenance information.
To Next Page
Loading...
