EST EST3X - Changing the Output State for an Audio Amplifier

Chapter 3: Operating instructions
EST3X Technical Reference Manual 63
To restore a relay output state:
1. Access the Main Menu, and then click Restore.
2. Click Relay, and then click the desired output priority.
3. Enter the panel, card, and device address of the relay.
4. Enter the access level password.
Changing the output state for an audio amplifier
To activate an audio amplifier output state:
1. Access the Main Menu, and then select Activate.
2. Select Audio Amp, and then select the desired output priority.
3. Enter the panel, card, and device address of the audio channel on the ACHS
channel selector card (for example the EVAC channel).
4. Enter the access level password.
5. Return to the Activate Menu, and then select Relay.
6. Select the desired output priority.
7. Enter the panel, card, and device address of the Signature Series amplifier
card.
To restore an audio amplifier output state:
1. Access the Main Menu, and then select Restore.
2. Select Audio Amp, and then select the desired output priority.
3. Enter the panel, card, and device address of the audio channel on the ACHS
channel selector card.
4. Enter the access level password.
5. Return to the Restore Menu, and then select Relay.
6. Select the desired output priority.
7. Enter the panel, card, and device address of the Signature Series amplifier
card.