EST EST3X - Control Panel Accessories

Chapter 2: Product description
EST3X Technical Reference Manual 13
Model
Description
4X
-12/S1GY Control-display module: Provides an additional operator interface using an
annunciator strip with 12 LED-switches and green-over-yellow LEDs.
Installs
on an SFS1-ELEC hardware layer module. See installation sheet
P/N 3101777 for specifications.
4X
-12/S1RY Control-display module: Provides an additional operator interface using an
annunciator strip with 12 LED-switches and red-over-yellow LEDs. Installs
on an SFS1-ELEC hardware layer module. See installation sheet
P/N 3101777 for specifications.
4X
-6/3S1G2Y Control-display module: Provides an additional operator interface using an
annunciator strip with six groups of three LED-switches and green LEDs
(top switch), and yellow LEDs (middle and bottom switch). Installs on an
SFS1-ELEC hardware layer module. See installation sheet P/N 3101777
for
specifications.
4X
-6/3S1GYR Control-display module: Provides an additional operator interface using an
annunciator strip with six groups of three LED-switches and green LEDs
(top switch), yellow LEDs (middle switch), and red LEDs (bottom switch).
Installs on an SFS1-ELEC hardware layer module. See installation sheet
P/N 3101777 for specifications.
4X
-4/3SGYWR Control-display module: Provides an additional operator interface using an
annunciator strip with four groups of three LED-switches and green LEDs
(top switch), yellow-over-white LEDs (middle switch), and red LEDs (bottom
switch). Installs on an SFS1-ELEC hardware layer module. See installation
sheet P/N 3101777 for specifications.
3X
-PMI Paging Microphone Interface: Adds controls for emergency voice/alarm
communications to a EST3X control panel. Consists of an audio mounting
bracket, EAEC Emergency Audio Evacuation Controller card, audio
enclosure, and paging microphone. Installs on the CAB6B backbox. See
installation sheet P/N 3101875 for specifications.
Control panel accessories
Table 4: Control panel accessories
Model
Description
3
-REMICA Remote Paging Microphone: Provides remote paging capability throughout a
building or campus. Each 3-REMICA
has two inputs for connecting other remote
microphone units. The paging circuit supports up to 63 interconnected remote
paging stations. See installation sheet P/N 387466 for specifications.