EST EST3X - Disable Menu

Chapter 2: Product description
26 EST3X Technical Reference Manual
Table 11: Enable Menu selection descriptions
Selection
Access level Description
Back
None Returns to the previous menu
Exit Menu
None Returns to the event message screen
Device
2 Enables a device or circuit; requires the panel, card, and
device address
Card
4 Enables an option card or control-display module; requires the
panel and card address
Group
Level 3: AND,
Matrix, Guard
Patrol, Zone,
and Inst. Text
groups
Level 4:
Service Group
Displays the Enable Group Menu from which you can enable
the following:
• AND group: Select from a list of AND groups
• Matrix Group: Select from a list of Matrix groups
• Service Group: Select from a list of Service groups
• Guard Patrol Group: Select from a list of Guard Patrol
groups
• Zone Group: Select from a list of Zone groups
• Inst Text Group: Select from a list of Instruction Text
groups
Time Control
3 Displays a list of the programmed time controls, from which a
time control may be enabled
Switch
3 Enables a switch on a control-display module; requires the
panel, card, and device address
LED
3 Enables the LEDs on a control-display module; requires the
panel, card, and device address
Disable Menu
Use the commands on the Disable Menu to take individual zones, input and
output points, option cards, and other parts of the fire alarm system out of
service.
Note: The disable command uses counters. Example, if you disable a device
twice, you must enable it twice to re-enable the device.
Table 12: Disable Menu selection descriptions
Selection
Access level Description
Back
None Returns to the previous menu
Exit Menu
None Returns to the event message screen.
Device
2 Disables a device or circuit; requires the panel, card, and
device
address