Chapter 2: Product description
EST3X Technical Reference Manual 33
Program Menu
Use the commands on the Program Menu to modify certain system settings,
restart the system, and clear the alarm history. If the system was programmed
with a secondary language, you can toggle languages from the Program Menu.
Table 16: Program Menu selection descriptions
Access level Description
None Returns to the previous menu.
u None Returns to the event message screen.
2 Sets the system time set in hours, minutes and seconds
(HHMMSS) that appears at the top of the LCD screen.
2 Sets the system date in month, day, and year that appears at
the top of the LCD screen.
Level 2 to
change Level 1
Level 3 to
change Level 2
Level 4 to
change Level 3
Level 5 to
change Level 4
Changes the password for Access levels 1 to 4.
4 Restarts the fire alarm system without removing power. The
command can be made by panel or all panels.
3 Creates a list of holidays so that a panel can activate a time-
controlled event based on whether the day is a scheduled
holiday. Each panel holds its own list of up to 255 holidays.
Select one of the following:
• Add Holiday: Requires the month and day (MMDD).
• Edit Holiday: Displays a list of scheduled
be edited.
• Delete Holiday: Displays a list of scheduled holidays that
can be deleted.
4 Resets the alarm counter and erases the list of events that
occurred on the panel since it was placed into service or the
last time the history file was cleared.
The command can be issued to a single panel or all panels.
Caution: This command is for use only by an authorized
service technician. Clearing the panel history file means that
all history data for the panel is permanently deleted.
To Next Page
Loading...
