Chapter 3: Operating instructions
46 EST3X Technical Reference Manual
In the address example below, you will change the number 3.
ENTER DEVICE
0103<DDD
Selecting an event message
Turn the rotary controller to scroll through and select an event on the LCD
screen. The selected event appears in a highlighted field at the top of the screen,
as shown in Figure 7.
Figure 7: Selecting an event message
Accessing the Queue Menu
The Queue Menu allows you to view details of a selected event message and to
select queues (Alarm, Supervisory, Trouble, or Monitor) to view the messages
stored in them.
Note: The Queue Menu is only available when the system is off-normal.
To access the Queue Menu:
1. From the event message screen, click the rotary controller to display the
Queue Menu.
Accessing the Main Menu
The Main Menu is directly accessed from the system normal screen or Queue
Menu when the system is off-normal.
To access the Main Menu from the system normal screen:
1. Click the rotary controller.
To Next Page
Loading...
