Chapter 3: Operating instructions
EST3X Technical Reference Manual 51
Device details
If a device activation causes an event, the Details screen shows the active
device’s logical address and the off-normal state.
Group details
If a group activation causes an event, the Details screen shows the state of the
device, device address, and device message, which is usually the device
location.
Guard patrol details
When a guard patrol route goes active, the Details screen shows the event or
state of the off-normal station, as well as the logical address, patrol or route
number, and station number of the device.
Instruction text details
You can program the system to include detailed instructions for certain events.
When specific devices go into alarm, the system generates a related monitor
event. If you select the monitor event, then press Details, the instruction text is
displayed.
Viewing reports
System reports are used to check the current condition or history of the EST3X
life safety network. A report can be displayed on the LCD screen or printed to a
local printer.
Status reports
The status reports listed below are available to help you determine the current
state of the system.
• All Active Points: Lists all addressable points that are in an active (alarm)
state
• Alarm: Lists all active alarm input device types
• Supervisory: Lists all active supervisory input device types
• Trouble: Lists all points in trouble
To Next Page
Loading...
