EXFO MaxTester 635G - Page 109

Setting Up Copper Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 99
FED Control
Other
The Other tab displays the default FED States set for
all other tests. The FED States are listed for the
following tests:
 xTalk TDR
 RFL Single/Separate Good Pair/K-Test
 Pair Detective
You can set the default values for the following:
 Auto/Manual TDR
 FaultMapper
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options and press the
up/down arrow keys to highlight the desired parameter.
4. Press to confirm the value.