Multimeter Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 151
Stressed Balance
To set threshold values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
Result Details
The Result Details read-only page displays the
Stressed Balance results and the pass/fail status.
Good values are lower () compared to the VF
(longitudinal) Balance test (
60).
Test Group is the overall test group of the
selected saved results file, for example
Multimeter.
Test Identification is the test type of the group, for
example Stressed Balance.
Test Modes identifies the manner in which the
test was run, for example Continuous.
To Next Page
Loading...
