EXFO MaxTester 635G - VF;AC Balance

Noise Tests
200 MAX-635G
NEXT
To select the Spot parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
Spot Threshold Settings
The Threshold Settings page allows you to set the
threshold values for the NEXT Spot test.
 Type is the threshold limit: either Maximum or
Minimum.
 Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select
the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.