Noise Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 205
NEXT
Spectrum Threshold Settings
The Threshold Settings page allows you to set the
Crosstalk threshold values at fixed and periodic
frequencies.
Type is the threshold limit: either Maximum or
Minimum.
Enabled is a flag to use the existing threshold:
either Yes or No. For example, setting the
threshold Enabled to No will disable pass/fail
threshold.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
To Next Page
Loading...
