Extron electronics CrossPoint 450 Plus Series - Tools.menu

5-19
CrossPoint / MAV Matrix Switchers • Matrix Software
Tools menu
Assign device icons —Displaysthecompletesetofinput
and output device icons. You can drag any of these
icons to the input and output boxes.
Edit device palette — Allows you to add your own custom
device icon graphics.
RGB delay settings —
Displaystheswitchinginterval
setting for each input and allows you to change them.
Audio-Input gain settings —
Displaystheaudiogain
level setting for a single input or for all inputs and
allows you to change it. The level is expressed as
the magnitude (number of decibels) and polarity
(positive, gain or negative, attenuation) of the audio
adjustment.
Audio-Output volume settings —
Displaystheaudiooutputlevelsettingfor
a single input or for all inputs and allows you to change it. The level is
expressed as a percentage of the input audio volume that is applied to the
output;0%isfullattenuation(audioissilent),100%isfullvolume.
Mute-Output settings—DisplaystheRGBDelay,Volume,andMuteAdjustscreen,
which allows you to mute and unmute individual or all video or audio
outputs.
View input frequencies —
(DSVP)Displaystheinputhorizontalandvertical
frequencies for each input.
Update firmware — Allows you to replace the firmware that is coded on the
switcher’scontrolboardwithouttakingtheswitcheroutofservice.See
“Updatingrmware” on page 5-13.
IP options —
AllowsyoutosetIPoptions.See“IPSettings/Optionswindow”on
page5-7.
HTML file manager —DisplaysalistofHTMLlesinstalledontheswitcherand
allowsyoutouploadcustomlesfromaconnectedPCtotheswitcher.See
“UploadingHTMLles”onpage5-18.