Extron electronics CrossPoint 450 Plus Series - Mute.and.unmute.one.or.all.outputs

6-15
CrossPoint / MAV Matrix Switchers • HTML Operation
Mute and unmute one or all outputs
Muteoneoralloutputsasfollows:
1. To select an individual output to mute or unmute, click the Output drop box.
Adropdownscrollboxappears(gure6-14).
Figure 6-14 — Output selection drop box
2. Click and drag the slider or click the scroll up button or scroll down
button until the desired output is visible.
3
. Click the desired output.
4. Click the Video Only, Audio Only, or Video & Audio button to select video,
audio, or both for muting. Each mouse click on a button toggles the other two
buttons off.
5
. Click the Mute or UnMute button to mute or unmute the selected output.
Click the Mute All or UnMute All to mute or unmute all of the outputs.
 ObservetheMutestatusindicationsonthepage(gure6-15).Unmutedis
displayed in green and muted is displayed in red.
Figure 6-15 — Mute status indications