6-7
CrossPoint / MAV Matrix Switchers • HTML Operation
Date/Time Settings fields
The Date/Time Settings fields (figure 6-5) provide a location for viewing and
setting the time functions.
Figure 6-5 — Date/Time Settings fields
To sync the switcher’s clock to the connected PC, simply click the Local Date/Time
button and then click the Submit button.
N
Use of the Local Date/Time button has no effect on the Zone and Daylight
Savings Time functions.
For more complete control of the date and time settings, change the settings as
follows:
1
. Click the desired value’s drop box. The adjustable variables are month, day,
year, hours, minutes, AM/PM, and (time) zone. A drop-down scroll box
appears (the year drop box is selected in figure 6-5).
2
. Click and drag the slider or click the scroll up button or the scroll down
button until the desired value is visible.
3
. Click the desired value.
N
When setting the time, set the local time. The Zone variable allows you to then
enter the offset from Greenwich Mean Time (GMT).
N
The Zone field identifies the standard time zone selected and displays the
amount of time, in hours and minutes, that the local time varies from the GMT
international time reference.
4
. Repeat steps 1 through 3 for other variables that need to be changed.
5
. If appropriate, select the appropriate Daylight Saving radio button to turn on
the daylight saving time feature for your region or nation.
N
When Daylight Saving Time is turned on, the switcher automatically updates its
internal clock between Standard Time and Daylight Saving Time in the spring
and fall on the date that the time change occurs in the country or region selected.
When Daylight Saving Time is turned off, the switcher does not adjust its time
reference.
6
. Click the Submit button.
To Next Page
Loading...
Need help?
General
