Extron electronics CrossPoint 450 Plus Series User Manual

HTML Operation, cont’d
CrossPoint / MAV Matrix Switchers • HTML Operation
6-10
Email address fields
The eight Email Address fields identify the e-mail addresses of the personnel to
whomtheCrossPointorMAVswitchere-mailsnoticationofitsfailureandrepair
status.Standarde-mailaddressconventions(nnnnn@xxx.com) apply.
The check boxes and drop boxes associated with each address field permit the
operator to specify specific criteria under which the switcher will e-mail recipients.
IntheassociatedMissingInputsdropboxes,selecttheinputstomonitorfor
presenceorabsenceofasignal.ChecktheFansandPowerboxestomonitorthe
coolingandpowersupplies.IntheassociatedE-Mail Options drop box, select
whether the recipient is to be e-mailed of failures, fixes, both, not notified, or to
be removed from the e-mail list. The Suspend option is useful for temporarily
removing personnel from the e-mail list when they are unavailable, such as on
travelorvacation.Deletingane-mailaddresseeandclickingtheSubmit button
removes the recipient from e-mail notification completely.
Firmware Upgrade page
TheFirmwareUpgradepageprovidesawaytoreplacethermwarethatiscoded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip. Access the Firmware
Upgradepage(gure6-8)byclickingtheFirmware UpgradelinkontheSystem
Settingspage.
Passwords
System Settings
Refresh
Email Settings
Figure 6-8 — Firmware Upgrade page
Updatetheswitcherrmwareasfollows:
N
The Firmware Upgrade page is only for replacing the firmware that controls
all switcher operation. To insert your own custom HTML pages, see “File
Management Page”, on page 6-11.
1
. VisittheExtronWebsite,www.extron.com,selecttheappropriateCrossPoint
orMAVproductcategory,selectthelatestfirmware installation package
(*.exe file) for the switcher, and download the file
. Note the folder to which you
save the firmware file.
2
. Run the executable (*.exe) file to decompress the firmware file.
3. ConnectthePCtotheCrossPointorMAVswitcherviatheswitcher’sLAN
port.
4
. AccesstheswitcherusingHTMLpages.
5. Click the Configuration tab.

Extron electronics CrossPoint 450 Plus Series Specifications

General

Brand	Extron electronics
Model	CrossPoint 450 Plus Series
Category	Matrix Switcher
Language	English