Extron electronics CrossPoint 450 Plus Series - Example.8:.Recalling.a.preset

3-33
CrossPoint / MAV Matrix Switchers • Operation
4. PressandreleasetheEnterbutton(gure3-46).Thecurrentcongurationis
now stored in the selected memory location.
C O N T R O L
PRESET ENTER
ESCVIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
save the preset.
All input buttons return to unlit
or background illumination.
Figure 3-46 — Press the Enter button
Example 8: Recalling a preset
Inthefollowingexample,apresetisrecalledtobecomethecurrentconguration.
The steps show the front panel indications that result from your action.
1
. PressandreleasetheEscbutton(gure3-47).
C O N T R O L
PRESET ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-47 — Clear all selections
2. PressandreleasethePresetbutton(gure3-48).
1 2 3 15 16
17 18 19 31 32
I
N
P
U
T
S
PRESET
All input buttons with
assigned presets light.
Preset Assigned
Press and release the
Preset button.
The Preset button lights.
No Preset Assigned
Figure 3-48 — Enter Recall Preset mode