Extron electronics CrossPoint 450 Plus Series - Page 78

Operation, cont’d
CrossPoint / MAV Matrix Switchers • Operation
3-34
3. Pressandreleasetheinputoroutputbuttonforthedesiredpreset
(gure3-49).
1 2 3 4 15 16
17 18 19 20 31 32
I
N
P
U
T
S
C O N T R O L
PRESET ENTER
ESC VIEW
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
Figure 3-49 — Select the preset
N
Figure 3-42 on page 3-31 shows the presets associated with the various input
and output buttons for all three front panel configurations.
4
. PressandreleasetheEnterbutton(gure3-50).Thecongurationstoredin
the selected memory location is now the current configuration and can be
viewed in the View-onlymode(seeexample4).
1 2 3 4 15 16
17 18 19 20 31 32
I
N
P
U
T
S
C O N T R O L
PRESET ENTER ESCVIEW
All input buttons return to unlit or background illumination.
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
Figure 3-50 — Press the Enter button