EasyManua.ls Logo

Extron electronics CrossPoint 450 Plus Series - Page 164

Extron electronics CrossPoint 450 Plus Series
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CrossPoint / MAV Matrix Switchers • HTML Operation
6-2
HTML Operation
The switcher can be controlled and operated through its LAN port, connected
viaaLANorWAN,usingaWebbrowsersuchasMicrosoft
®
InternetExplorer
®
.
The browser’s display of the switcher’s status or operation has the appearance of
Webpages.Thischapterdescribesthefactory-installedHTMLpages,whichare
always available and cannot be erased or overwritten.
N
If your Ethernet connection to the matrix switcher is unstable, try turning off
the proxy server in your Web browser. In Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN Settings, uncheck the Use
a proxy server... box, and then click OK.
Download the Startup Page
AccesstheswitcherusingHTMLpagesasfollows:
1. StarttheWebbrowserprogram.
2. Click in the browser’s Address field.
3. EntertheMatrixIPaddressinthebrowser’sAddresseld.
N
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
4
. Ifyouwantthebrowsertodisplayapageotherthanthedefaultpage(suchas
a custom page that you have uploaded), enter a slash (/) and the file name to
open.
N
The browser’s Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}
N
The following characters are invalid in file names:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
5
. PressthekeyboardEnterkey.Theswitchercheckstoseeifitispassword
protected.
Iftheswitcherisnotpasswordprotected,itchecksanddownloadstheHTML
pages (proceed to step 7).
Iftheswitcherispasswordprotected,theswitcherdownloadstheEnter
ConnectTopage(gure6-1).
Figure 6-1 Connect To page
N
A User name entry is not required.
6. Click in the Password field and type in the appropriate administrator or user
password. Click the OK button.
7
. The switcher checks several possibilities, in the following order, and then
responds accordingly:

Table of Contents

Other manuals for Extron electronics CrossPoint 450 Plus Series

Related product manuals