3-7
CrossPoint / MAV Matrix Switchers • Operation
d
Preset button —ThePresetbuttonhastwoprimaryfunctions(•)andthree
secondary functions (❏):
• ActivatesSave Preset mode to save a configuration as a preset and Recall
Preset mode to activate a previously-defined preset.
• BlinkswhenSave Preset mode is active and lights steadily when Recall
Preset mode is active.
❏
IntheI/O Group mode, select group 2 and indicate the selection.
See“I/Ogrouping”onpage3-24.
❏ With the Enter, View, and Esc buttons, select Serial Port Selection and
Configurationmode.See“SelectingtherearpanelRS-232/RS-422port
protocolandbaudrate”onpage3-54.
❏ Select19200baudfortherearpanelRS-232/RS-422portinSerial Port
Selection and Configuration
modeandindicatetheselection.See“Selecting
therearpanelRS-232/RS-422portprotocolandbaudrate”onpage3-54.
e
View (
<
) button — The View (
<
) buttonhasoneprimaryfunction(•)andsix
secondary functions (❏):
• SelectandindicateView-only mode, which displays the current
configuration.
N
View-only mode also provides a way to mute and unmute the outputs. See
“Muting and unmuting video and audio outputs” on page 3-35.
❏
IntheI/O Group mode, select group 3 and indicate the selection.
See“I/Ogrouping”onpage3-24.
❏ (CrossPoint switchers)DecreasetheRGBdelayofswitchestothe
selectedoutput.See“SettingRGBdelay(CrossPointSwitchers)”on
page3-28.
❏ (Audio models)Decreasetheaudioleveloftheselectedinput.
See“Viewingandadjustingtheinputaudiolevel(audiomodels)”on
page3-38.
❏ (Audio models)Decreasethevolumeoftheselectedoutput.
See“Viewingandadjustingtheoutputvolume(audiomodels)”on
page3-44.
❏ WiththeEnter,Preset,andEscbuttons,selectSerial Port Selection and
Configuration
mode.See“SelectingtherearpanelRS-232/RS-422port
protocolandbaudrate”onpage3-54.
❏ Select38400baudfortherearpanelRS-232/RS-422portinSerial Port
Selection and Configuration mode, and indicate the selection.
See“SelectingtherearpanelRS-232/RS-422portprotocolandbaudrate”
onpage3-54.
To Next Page
Loading...
Need help?
General
