Extron electronics CrossPoint 450 Plus Series - Page 61

3-17
CrossPoint / MAV Matrix Switchers • Operation
4. Press and release the output 1 button (figure 3-14).
C O N T R O L
PRESET ENTER
ESCVIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
O
U
T
P
U
T
S
Press and release the Output 1 button.
The button blinks green to indicate that only the selected RGBHV
or video input will be tied to this output.
The Enter button blinks
green to indicate the need to
confirm the change.
Figure 3-14 — Select the output
5. Press and release the Enter button (figure 3-15).
ENTER
All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.
Figure 3-15 — Press the Enter button
The current configuration (figure 3-16) is now:
• Input 5 video is tied to output 1, output 3, output 4, and output 8.
• Input 5 audio is tied to output 3, output 4, and output 8.
Figure 3-16 — Example 2, final configuration