Extron electronics CrossPoint 450 Plus Series - Page 63

3-19
CrossPoint / MAV Matrix Switchers • Operation
4. Press and release the output 4 button (figure 3-20).
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
O
U
T
P
U
T
S
C O N T R O L
PRESET ENTER
ESCVIEW
Press and release the Output 4 button.
The button blinks red to indicate the pending change:
audio input will be untied.
The Enter button blinks
green to indicate the need to
confirm the change.
Figure 3-20 — Deselect the output
5. Press and release the Enter button (figure 3-21).
ENTER
All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.
Figure 3-21 — Press the Enter button
The current configuration (figure 3-22) is now:
• Video — Input 5 video is tied to output 1, output 3, output 4, and
output 8.
• Audio — Input 5 audio is tied to output 3 and output 8.
Figure 3-22 — Example 3, final configuration, audio switcher