Extron electronics CrossPoint 450 Plus Series - Page 74

Operation, cont’d
CrossPoint / MAV Matrix Switchers • Operation
3-30
4. PressandreleasetheEsc(
>
)buttononce(gure3-40)toincreasetheRGB
delay by a half second.
 PressandreleasetheEsc(
>
) button twice more to increase the RGB delay by a
whole second. Note the input button indication changes that occur each time
the Esc (
>
) button is pressed and released.
 Figure3-40showtheresultofpressingtheEsc(
>
) button a total of 3 times.
ESC ESC ESC
1 2 3 4 5 6 7 8 9 10
17 18 19 20 21 22 23 24 25 26
16
32
I
N
P
U
T
S
3.5 4.0 4.5 5.0 3.0 2.5 2.0 1.5 1.0 0.5
Press the Esc button to increase
the RGB interval that is applied to
switches to the selected output by
a half second per button push.
Input buttons 1 through 10 display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the lit input buttons display 5.0 seconds of RGB interval.
Figure 3-40 — Adjust the RGB delay interval
5. PressandreleasetheRGBHVbutton(gure3-41).
I / O
RGBHV AUDIO
The Audio button lights red.
Press the RGBHV button
to exit RGB delay mode.
All input buttons and output buttons
return to unlit or background illumination.
The RGBHV button stops
blinking and returns to unlit
or background illumination.
Figure 3-41 — Deselect RGB Delay mode