151
www.factoryfive.com 508-291-3443
Tighten the cable sheath to the firewall with the retaining nut. A piece of tape on the end of the cable
will help prevent it from backing out of the sheath.
Check the full range of the accelerator pedal travel to ensure that there are no interferences with the
pedal or travel.
Steering System
Steering Shaft
3
/
16
”,
5
/
16
” hex keys, ½”,
9
/
16
”, 10mm wrenches, marker, drill,
3
/
16
” drill bit, Phillips head
screwdriver, 15mm deep socket, ratchet.
Steering bearings/Hardware, Steering shaft.
Unpack the steering shaft assembly.
To Next Page
Loading...
