EasyManua.ls Logo

Factory Five Racing Type 65 Coupe - Steering Wheel

Factory Five Racing Type 65 Coupe
442 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
250
www.factoryfive.com 508-291-3443
Secondary body fasteners, certificate of origin envelope
Factory Five Racing has included a Certificate of Origin along with a Nameplate for your kit.
The serial number from the Certificate of Origin matches the number engraved on the 2”x 2”
tube going across the car at the front of the cockpit on the driver side. Below is an example of
how the nameplate looks. The VIN number space is provided so that your state issued VIN
number can be engraved if you so desire. This can be engraved at any Trophy or mall engraver.
A few places that people have riveted these plates are: front of the 2”x 2” hoop in the cockpit to the left
of the steering shaft; on top of the driver footbox; on top of the passenger footbox
Steering Wheel
Phillips head screw driver, 10mm wrench,
5
/
16
hex key
Steering wheel/Hardware
The standard steering wheel is a 14” wood wheel, we also have a 14” leather wheel available.
Unpack the steering wheel hardware.

Table of Contents

Related product manuals