273
www.factoryfive.com 508-291-3443
Hood Latch
7
/
32
” drill bit, drill, ⅛” hex key,
5
/
16
”,
9
/
16
” wrench,
9
/
16
” deep socket, jig saw, marker, chassis grease,
rivet gun, masking tape.
Nose/trunk fastener assembly
Open the latches and apply a little bit of chassis grease to the sides of the latch.
Work the latches a few times to help loosen them up.
Attach the latch mount plate to the front side of the latch as shown below.
To Next Page
Loading...
