30
www.factoryfive.com 508-291-3443
Unbolt and remove the pedal box.
Computer
Socket set.
Mustang Computer and OEM plastic cradle.
If you are going to run the car with a Carburetor you can disregard the EFI wiring harness part in
this section.
We recommend the use of a fuel inertia cut off switch in your car if using an electric fuel pump.
EEC-IV computer and cradle.
Remove the kick panel in the passenger footbox.
Disconnect the ground strap in the footbox next to the computer.
Remove the computer and its plastic holder from the passenger footbox area.
Turn Signal and Ignition Switches
Socket set, extension, Phillips head screwdrivers, needle nose pliers, T-15 Torx screwdriver
Turn signal and ignition switches
87-93 Steering column (with ignition, turn signal stalk)
To Next Page
Loading...
