145
www.factoryfive.com 508-291-3443
From the underside, push the screw through the quadrant pedal stop mount plate and hand tighten the
locknut on the screw.
Accelerator Cable
5
/
64
” hex key, ⅜”,
7
/
16
”, ½” wrenches, wire cutters.
Pedal box hardware, Accelerator cable components.
The cable design is set up for a 96-04 4.6L Mustang engine with an OEM pedal but using the
supplied ball studs and retainers it can be adapted for all applications.
87-93 Fuel Injected and Carbureted Applications
Using a ruler and marker measure and mark 2⅝” from the cylinder slug on the engine end of the cable.
To Next Page
Loading...
