154
www.factoryfive.com 508-291-3443
Steering Rack
Needle Nose Pliers, ¾” wrench, ¾” socket, Ratchet, 1.50” wrench or Adjustable wrench.
Mustang Power steering rack, Steering System Hardware
87-93 steering rack and fasteners (hydraulic lines removed).
If not already in, insert the stock rubber bushings and kit spacer sleeves into the rack.
Pull back the rubber boot on the inner tie rod and remove the inner tie rod from the steering rack.
Line up the steering shaft and adapter and push the rack onto the steering shaft.
Bolt the rack into the frame. It is easier to do the driver side first then swing the passenger side down
into the mount.
To Next Page
Loading...
