Factory Five Racing Type 65 Coupe - 5-Lug (4.5 Pattern)

399
www.factoryfive.com 508-291-3443
11”Front
Spindle OEM 87-93 V8 Mustang front spindle
Rotor OEM 87-93 V8 Mustang 11” rotor
Caliper OEM 87-93 V8 Mustang 60mm caliper
10.5”Rear
Stainless Steel Brake Corp. 87-93 Mustang disc brake conversion kit (Part #A-112-1)
OR
Disc Brakes R’ Us - Select FORD and FACTORY FIVE for options
OR
Rotor OEM 87-88 Thunderbird Turbo Coupe 10.5” rotor
Caliper OEM 87-88 Thunderbird Turbo Coupe 1.4375” caliper
Bracket (If attempting to purchase the parts above separately, be aware that the mounting brackets
for the calipers from the Thunderbirds do not work with the 87-93 Mustang axles, and the brackets are
not sold by any major manufacturer individually. There are a few small machine shops that sell custom
brackets to make these calipers work.)
OR
Complete 87-88 Thunderbird Turbo Coupe rear axle (This axle measures 61.125” hub-to-hub where the
87-93 Mustang measures 59.25” hub-to-hub, so wheel offsets need to be made accordingly).
5-Lug (4.5”pattern)
Master Cylinder – FFR
15
/
16
” Master cylinder/Proportioning valve (FFR#14739)
Front
11”Front
FFR Roadster two piece front spindles
FFR Front Brake set (Twin piston aluminum 1.5625” PBR calipers)
OR
Spindle OEM 94-newer Mustang front spindle
Rotor OEM 99-01 Mustang GT 11” rotor
Caliper OEM 99-01 Mustang GT 2 piston 1.5625” PBR caliper
13” Front
Spindle FFR Roadster two piece front spindles
Rotor OEM 94-04 Mustang Cobra™ or Mach 1 13” rotor
Caliper OEM 94-04 Mustang Cobra™ or Mach 1 2 piston 1.76” PBR caliper
OR
Spindle OEM 94-newer Mustang front spindle
Rotor OEM 94-04 Mustang Cobra™ or Mach 1 13” rotor
Caliper OEM 94-04 Mustang Cobra™ or Mach 1 2 piston 1.76” PBR caliper
Rear
For 87-93 width rear axle