94
www.factoryfive.com 508-291-3443
If using a 3 Link, attach the upper link to the frame.
If using the stock Mustang shocks, skip the next section.
Optional Rear Coil-Over Shock Assembly
Snap ring pliers, ¾” wrench, ¾” socket, ratchet, ruler, marker, hack saw.
Roadster/Coupe rear shock kit
The rear shocks are pre-valved at the factory in compression and rebound for good street use.
The shocks can be adjusted in rebound as per Koni’s instructions if so desired. The rear springs
are 350lb. Other springs are available for different ride characteristics.
WARNING! Incorrect assembly and maintenance of this part can cause serious injury or death.
To Next Page
Loading...
