161
www.factoryfive.com 508-291-3443
Cockpit Aluminum
Drill, ⅛” drill bit, rivet tool, Silicone, caulking gun, #8 self tapping screws, #8 hex nut driver,
ruler, marker, Acetone or carburetor cleaner, rags.
Packaged aluminum, mounted aluminum, Secondary body fasteners.
Do one panel at a time. Be careful of the sharp aluminum edges, they can cut you.
Passenger Footbox
Locate the passenger footbox top and drill and mark the holes in the top flat surface only.
To Next Page
Loading...
