42
www.factoryfive.com 508-291-3443
The lower shock mount brackets will get used on the front lower control arms to mount the front
shocks
Front Lower Control Arms
Hack saw, file grinder
Remove the area, near the center of the spring mount to prevent damage to the coil-over unit thru any
contact whatsoever.
Drilled and modified front lower control arm.
Attach the rear shock mount to the control arm through the hole in the spring seat with the small leg
sticking up.
Check clearance with the new shock and the new mount. These parts must move freely without
contacting the control arm surface.
To Next Page
Loading...
