73
www.factoryfive.com 508-291-3443
Front Brakes
Sockets, Ratchet, Torque wrench, chassis grease, rags, brake cleaner,
Mustang front brake calipers and rotors
Make sure that your brake pads and rotors are in good condition.
Donor Front Brakes
Make sure that the hub bearings are greased correctly and adequately.
Push the rotor onto the spindle.
Push the outer bearing on then the flat washer, and adjusting nut.
Adjust the bearing play.
Attach the nut lock and insert a cotter pin.
Using a large socket or a flat head screwdriver and rubber mallet, hit the dust cap onto the rotor.
Clean the rotor with brake cleaner.
Install the caliper on the spindle; make sure that the fluid bleeder is at the top of the caliper. Torque the
caliper mounting bolts to 61-88Nm (45-65lbft).
Complete kit Front Brakes
12mm socket, Ratchet, 16mm wrench, Torque wrench, thread locker
Front 11” Caliper/Rotor Assembly
To Next Page
Loading...
