204
www.factoryfive.com 508-291-3443
Floor
With the rear taillight harness tied up and secure, silicone and install the lower trunk floor.
Drivetrain Preparation
Aftermarket TKO 500 and TKO 600 prep
Hack saw or Reciprocating saw, ¾” socket, ratchet
Transmission, Polyurethane engine/transmission mount kit
The Coupe works well with the midshift option that is available with the TKO. This moves the
shifter from the Mustang rear location to the middle location which allows for a vertical shifter
handle instead of the forward leaning handle.
To Next Page
Loading...
