289
www.factoryfive.com 508-291-3443
Exhaust
½” sockets, ½” wrench, jack stands, jack, ¼”,
5
/
16
” hex key.
Headers, side exhaust, locktite.
Try not to drop the side exhaust assembly as it will probably land on the outer curved surface and
dent (if it sounds like this has happened to us, it has).
The side-pipes are positioned with the rear mount on the bottom of the pipe facing the body.
Headers
Mount the headers to the engine and fully tighten. The driver side is easiest to install from above the
body but underneath the 1”x 1” tube. It will also fit from the bottom if the car is raised.
Driver side header
Passenger side header mounted.
To Next Page
Loading...
