255
www.factoryfive.com 508-291-3443
Engine
Fill the engine with Oil and coolant. Both these fluids should be rechecked after you have started the
engine for the first time. Make sure there is some coolant in the overflow to start out, about
1
/
3
full is
good.
Get the engine up to temperature and check for leaks and make sure the fan is working.
If you need to you can temporarily bolt your side-pipes in place to keep things quieter.
Wheels
Install and torque your wheels. Make sure they rotate freely and do not interfere with the brake calipers,
lines, or any suspension components.
To Next Page
Loading...
