262
www.factoryfive.com 508-291-3443
Pull the sides of the body out to clear the frame.
Watching the rear of the frame, move the body forward slowly lowering the front.
Watch the door latch posts.
Pull the body out to get around the hinges.
Move forward until the rear hatch tubing is lined up with the lip on the body and put the body down in
place. Watch the door hinge mounts and striker post mounts on the frame.
Once the body is in position, it will be snug against the taillight plates in the rear, the lower rear corners
of the door opening should be at the corner of the tubes for the door latch and the windshield mounts
should be close.
To Next Page
Loading...
