83
www.factoryfive.com 508-291-3443
8.8” Rear axle assembly, Box 11 Solid axle Traction Lok brackets, Rear control arms.
Use caution when working with the rear end assembly, it weights 225 lbs.
Skip to the Independent Rear suspension if not installing a Solid axle.
See the donor parts prep section if the control arm holes have not been drilled out
Position the Traction Lok brackets on the rear end with the bolts provided (the two short bolts go on the
sides).
Axle Bracket Driver's Side
To Next Page
Loading...
