Festo CPX - Operating Voltage for Electronics;Sensor Supply; Load Voltage of Outputs

A. Technical appendix
A−5
Festo P.BE−CPX−SYS−EN en 0902e
Operating voltage for electronics/sensor supply
Power supply
 Nominal value
 Tolerance
DC 24 V (reverse polarity protected)
18 ... 30 V
Current consumption Sum of the current consumption of all modules
without sensor supply
max. 1.5 A
See also the manual for the modules
Residual ripple 4 Vpp (within tolerance)
Load voltage of outputs
Power supply
 Nominal value
 Tolerance
DC 24 V (reverse polarity protected)
18 ... 30 V
Current consumption Sum of all switched−on outputs (see manual for
output modules)
Residual ripple 4 Vpp (within tolerance)