Festo CPX - CPX Terminal with MIDI;Maxi Pneumatics; Valve Terminal Pneumatics of Type MIDI;Maxi

1. Overview of components
1−15
Festo P.BE−CPX−SYS−EN en 0902e
Valve terminal pneumatics of type Midi/Maxi
Valve terminal pneumatics of type Midi/Maxi are also built up
on a modular basis. These valve terminal pneumatics consist
of MIDI and MAXI valves. Valves of both sizes can be oper
ated together on a CPX terminal. In this way adaptation to the
requirements of the machine or system can also be made
on
the pneumatic side.
The valve positions can be configured in steps of two from 2
to 26 valve locations. Unused valve positions can be sealed
with blanking plates.
1 Pneumatic
interface for
Midi/Maxi
2 Valve terminal
pneumatics of
type Midi/Maxi
3 Right end plate
4 Maxi valves
5 Midi valves
12
3
4
5
Fig.1/6: CPX terminal with Midi/Maxi pneumatics