Festo CPX - Module Parameter Monitoring

C. General information on parametrisation
C−25
Festo P.BE−CPX−SYS−EN en 0902e
The following monitoring functions can be activated or
deactivated by modules, providing the module supports
the relevant monitoring function:
Module parameter monitoring
Description
Short circuit/overload, sensor supply Monitors whether sensor supply is overloaded or short
circuited
Short circuit/overload of outputs Monitors whether outputs are overloaded or short
circuited
Undervoltage for outputs/valves Monitors the load voltage supply for the valves/outputs
Short circuit/overload at the valve Monitors whether valve outputs are overloaded or short
circuited
Upper/lower limit value Monitors the upper/lower limit
Parametrisation error Monitors module parametrisation (plausibility check)
Monitoring wire fracture (channel−
specific)
Monitoring can be activated and deactivated for each
channel (0 = inactive; 1 = active).
Tab.C/10: Module parameter monitoring
The meaning of the module parameter depends on the mo
dule used. Detailed information can be found in the manual
for the relevant module.