Festo CPX - Fitting the CPX Terminal Onto a Wall

2. Assembly
2−31
Festo P.BE−CPX−SYS−EN en 0902e
Fitting the CPX terminal onto a wall
Caution
Overloading the mounting holes, bending the CPX terminal
or natural resonance can cause damage.
Every 100 or 150 mm, use additional mountings of the type
CPX−BG−RW−... for plastic version interlinking blocks, or
type CPX−M−BG−RW−... for metal version interlinking blocks.
Fastenings of type CPX−BG−RW−... can be clipped into two
adjacent interlinking blocks (see
Tab.2/4) and provide addi
tional holes for fitting onto a wall. Note the relevant fitting
instructions.
Fastenings of type CPX−M−BG−RW−... can be screwed onto
metal version interlinking blocks with the enclosed screws
(see Tab.2/4) and provide additional holes for fitting onto
a wall.