Festo CPX - Page 15

Contents and general safety instructions
XIII
Festo P.BE−CPX−SYS−EN en 0902e
Type Title Description
Description
Electronics
System description"
Type P.BE−CPX−SYS−...
Overview of structure, components and mode
of operation of CPX terminals;
installation and commissioning instructions as
well as basic principles of parametrisation
CPX bus node"
Type P.BE−CPX−FB...
Instructions on assembly, installation, commis
sioning and diagnostics of the relevant bus
nodes
CPX I/O modules"
Type P.BE−CPX−EA−...
Notes on connections and instructions on fit
ting, installing and commissioning input and
output modules of type CPX−.... and the MPA,
CPA and Midi/Maxi pneumatic interfaces
CPX analogue I/O mo
dules"
Type P.BE−CPX−AX−...
Notes about connection types and instructions
for fitting, installing and commissioning CPX
analogue I/O modules
"CPX−CP interface"
Type P.BE−CPX−CP−..
Instructions on fitting, installing, commissio
ning and diagnosing CP systems with the
CP interface type CPX−CP−4−FB
Handheld"
Type P.BE−CPX−MMI−1−..
Instructions for commissioning and diagnosing
CPX terminals with the handheld typeCPX−
MMI−1
MPA electronics modu
les"
Type P.BE−MPA−
ELEKTRONIK−...
Instructions on assembly, installation, commis
sioning and diagnostics of the MPA pneumatic
and electronic modules.
Manual
Electronics
CPX−FEC"
Type P.BE−CPX−FEC−...
Instructions for fitting, installing,
commissioning and diagnosing the
CPX Front End Controller.
Software
package
FST" Programming in statement list and ladder
diagram for the FEC
Table0/1: Descriptions for the CPX terminal  part 1