Contents and general instructions
XXXIII
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
The identification requires a certain amount of time.
Step 6
Calibrate the measuring system (optional)
(see also section 4.7)
If necessary, calibrate the measuring system.
Step 7
Move the axis manually (optional)
(see also section 4.8)
Check the functionability of the controller and the effective
ness of the software end positions.
Step 8
Enter the test program
(see also section 4.9 and chapter 5)
1. Create the program and open it. To do this, mark the soft
ware icon and select the command [Insert object] in the
menu [Edit].
Enter program number (0), the title and, if applicable, a
description of the program in the dialogue window
New
program". Confirm the entry.
Or open the existing program.
2. Enter the program in the program window, e.g.:
To Next Page
Loading...
