Fiat Ducato - Page 182

F0N0082m
fig. 176
F0N0081m
fig. 178
F0N0083m
fig. 177
DIRECTION INDICATORS
To change the bulb, proceed as follows:
❒ turn the bulb holder anticlockwise A-fig. 178 and pull
it out;
❒ remove the bulb by pushing it slightly and turning it in
an anticlockwise direction (bayonet mount);
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove protection cover A-fig. 175 by turning anti-
clockwise;
❒ disconnect the electric connector A-fig. 177;
❒ release the bulb holder clip B-fig. 177;
❒ remove the bulb C-fig. 177 and replace it;
❒ fit the new bulb, ensuring that the outline of the metal
part coincides with the grooves on the curve of the
headlight. Then reconnect the bulb holder clip A and
reattach electrical connector B;
❒ refit protective cover/bulb holder A-fig. 175 by turning
it clockwise and locking it properly.
181
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
165-198 DUCATO LUM EN 12-02-2010 8:43 Pagina 181