F0N0039m
fig. 71
“Smart washing” function
Pull the lever towards the steering wheel (rocking posi-
tion) to operate the windscreen washer jet, fig. 71
Keeping the stalk pulled for more than half a second, with
just one movement it is possible to operate the washer jet
and the wiper at the same time.
The wipers stop working three strokes after releasing the
lever.
A further stroke after 5 seconds completes the wiping
operation.
A: windscreen wipers off;
B: intermittent operation.
With the lever in position B, turn control F to select one
of four different speeds for the intermittent operation
mode:
, = very slow intermittent operation
- - = slow intermittent operation
- - - = medium intermittent operation
- - - - = fast intermittent operation
C: continuous slow operation;
D: continuous fast operation;
E: temporary fast operation (rocking position).
Temporary fast operation in position E is limited to the
time that the lever is manually held in this position. The
lever returns to position A when it is released, automat-
ically stopping the windscreen wipers.
IMPORTANT Replace the wiper blades as specified in the
“Maintenance and care” section.
76
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
Do not use the windscreen wipers to re-
move layers of snow or ice from the wind-
screen. In such conditions, the windscreen
wipers may be subjected to excessive stress,
prompting intervention from the motor protection
which prevents operation for a few seconds. If the
issue persists, contact a Fiat Dealership.
037-122 DUCATO LUM EN 11-02-2010 14:26 Pagina 76
To Next Page
Loading...
