F0N0094m
fig. 198
REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electrical system: they cut in (i.e. they blow)
in the event of a fault or improper action on the system.
When a device does not work, check the efficiency of its
fuse: the conductor element A-fig. 198 must be intact.
If it is, replace the blown fuse with another with the same
amperage (same colour).
B intact fuse;
C fuse with damaged filament.
189
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
Never replace a blown fuse with metal
wires or other recovered material.
Never replace a fuse with another of high-
er amp rating; FIRE HAZARD.
WARNING
If a general protection fuse (MEGA-FUSE,
MIDI-FUSE, MAXI-FUSE) is blown, con-
tact your Fiat Dealership. Remove the key from
the ignition switch and switch off all loads before
replacing a fuse.
WARNING
Should the fuse blow again, contact Fiat
Dealership.
WARNING
165-198 DUCATO LUM EN 12-02-2010 8:44 Pagina 189
To Next Page
Loading...
