Fiat Ducato - Adjusting the Buzzer Volume (Buzz); Setting the Distance Unit (Unit)

Setting the distance unit (Unit)
With this function it is possible to set the unit.
To set the required unit proceed as follows:
– briefly press button MODE, the display will show the
wording (Unit) and the previously set unit (km) or (mi);
– press button ▲ or ▼ to select the required distance unit.
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.
Adjusting the buzzer volume (bUZZ)
This function enables to adjust the volume of the buzzer
accompanying any failure/warning indication.
To set the desired volume, proceed as follows:
– briefly press button MODE, the display will show the
wording (bUZZ);
– press button ▲ or ▼ to select the required volume (vol-
ume can be adjusted according to 8 levels);
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.
22
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
001-036 DUCATO LUM EN 11-02-2010 13:53 Pagina 22