Fiat Ducato - HEATING AND VENTILATION CONTROLS

– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.
Adjust the button volume (Button Vol.)
This function is used to set the volume of the roger-beep
accompanying the activation of buttons MODE,
▲ and ▼
through 8 levels.
To set the desired volume, proceed as follows:
– press the MODE button briefly, making the display flash
the previously set volume level;
– press button
▲ or ▼ to adjust;
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.
Selecting the language (Language)
Display messages can be shown in different languages: Ital-
ian, German, English, Spanish, French, Portuguese and
Dutch.
To set the desired language, proceed as follows:
– briefly press button MODE: the previously set language
starts flashing on the display;
– press button
▲ or ▼ to select;
– press the MODE button briefly to return to the menu
screen or press the button for longer to return to the stan-
dard screen without memorizing.
Adjust the failure/warning buzzer volume
(Buzzer Volume)
This function allows the volume of the buzzer which ac-
companies the display of failures/warnings to be adjusted
(8 levels).
To set the desired volume, proceed as follows:
– press the MODE button briefly, making the display flash
the previously set volume level;
– press button
▲ or ▼ to adjust;
32
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
001-036 DUCATO LUM EN 11-02-2010 13:53 Pagina 32